Introduction
If you import whey protein, herbal supplements, creatine powder and other nutritional goods into Australia, the packaging you choose is not just about sealing and shelf life. Australian regulators and local retailers require proof that your HDPE jars, caps, induction liners and pressure sensitive liners will not transfer harmful chemicals into powdered supplements.
That proof comes from a food contact migration test.Many first-time importers run into delays, cargo holds or even rejection at the border because they misunderstood migration test rules. Unlike some markets with a single fixed checklist, Australia’s framework is risk-based, and the importer carries the legal responsibility to verify packaging safety before goods arrive.
You can download our available mold list as below to check in-stock molds and save your tooling cost.
What Is a Food Contact Migration Test?
Migration testing is a laboratory procedure that simulates long-term contact between your plastic packaging and food, to measure how much chemical substance transfers from the jar, cap or liner into the product.
There are two core types you will see on test reports:
– Total migration: Measures the overall mass of all substances that leach out of the plastic material. This is the basic screening test for HDPE food jars.
– Specific migration: Tests for individual restricted substances, such as heavy metals, monomers, plasticisers and additives. This is critical for coloured jars, printed caps and foil induction liners.
Laboratories use food simulants to mimic the real supplement. For dry powder supplements, the test conditions are different from liquid or acidic food. Temperature and contact time are set to replicate sea freight, warehouse storage and the full shelf life of your supplement brand.
What Rules Apply for Australia?
Australian requirements sit under the Australia New Zealand Food Standards Code, Standard 3.2.2. The core rule is simple: packaging must be fit for purpose and must not contaminate food. The importer must hold evidence to support this claim.
FSANZ does not publish a single mandatory migration limit that copies EU 10/2011 word-for-word. However, Australian border inspectors and state food regulators widely accept international migration standards as evidence of compliance, especially for HDPE supplement packaging.
A very common question: does Australia accept FDA or EU migration test reports?
The answer is yes, in most cases, but the report must match your exact packaging item. You cannot use a generic “HDPE food grade certificate” if your shipment uses a custom liner, pigmented jar or printed cap. Each component touching the supplement needs coverage: jar body, cap, induction foil liner, PS liner, inner foam and any adhesive.
What Test Conditions Are Right for Dry Supplement Powders?
This is where many importers waste money on the wrong test.
Liquid food uses aqueous, acidic or alcoholic simulants. Protein powder, greens powder and creatine are low-moisture dry foods. Testing with water simulant at high temperature will overstate migration and create unnecessary failures.
For your HDPE supplement jars, the correct test scope should state:
– Dry food simulant
– Test temperature matching expected storage conditions (not boiling)
– Contact time matching your declared shelf life
– Separate testing for jar resin, cap compound and liner
If your supplier only provides a migration report for the jar body but skips the induction seal liner, the document is incomplete. Inspectors will flag this gap during risk checks.
Common Risks for Australian Importers
1. Cargo inspection under IFIS
Shipments of packaged supplements fall under the Imported Food Inspection Scheme. Officials can request packaging safety documentation at any time. If you cannot provide a valid migration test report, the consignment may be held for further testing, which creates expensive port storage fees and delayed launch schedules.
2. Recycled PCR HDPE extra scrutiny
PCR recycled HDPE is popular for sustainable branding, but Australian buyers and regulators look closer at migration results for recycled resin. Recycled plastic carries higher risk of unexpected contaminants, so importers must request full migration reports, not just a simple “food grade” statement.
3. Mixing components from different suppliers
If you buy HDPE jars from one factory and induction liners from another, you need separate migration certificates for each part. A jar test report does not cover the foil liner that touches the supplement directly.
4. Expired or out-of-scope test reports
Reports are tied to a specific mould, resin formula, pigment and liner construction. If the supplier changes the masterbatch, glue or foil layer, the old migration report is no longer valid.
What Documentation Should Your Supplier Provide?
When you source HDPE jars for Australia, ask your packaging supplier for this full package, not just a one-page certificate:
1. Third-party lab migration test report, listing material, simulant, time and temperature
2. Material declaration for HDPE resin, pigments, cap plastic and liner structure
3. BPA-free statement (expected by nearly all Australian supplement retailers)
4. Declaration of conformity for food contact use
5. Batch traceability information, so you can link the test report to your production run
We provide these documents together with our HDPE supplement jars and matching induction liners for Australian importers. All test reports cover dry powder contact conditions, suitable for whey, plant protein, creatine and herbal blends.
How to Choose Between Test Standards
Many importers ask which standard to specify when placing an order with their packaging factory. Here is practical guidance for your Australian supplement supply chain:
– EU 10/2011: Widely accepted in Australia, well recognised by labs and retailers, good default choice
– FDA 21 CFR: Also accepted, common for brands that sell into both US and Australia
– Australian-only testing: Usually requested only when a local retailer or auditor specifically mandates it
The key is consistency: the test standard must be listed clearly on the report, and the test matrix must match your actual product (dry powder).
Frequently Asked Questions
Q1: Do I need migration testing if I only import empty plastic jars, not filled supplements?
If you import empty jars then fill them locally in Australia, the Australian food business (the filler/brand owner) still holds the responsibility to confirm packaging safety. Most co-packers and supplement brands will require migration test reports from the empty jar supplier before they approve the packaging.
Q2: Is a “food grade certificate” the same as a migration test report?
No. A food grade letter only states the resin is food-contact suitable. Migration testing proves that under real storage conditions, chemical transfer stays within safe limits. Border inspectors and Australian supplement retailers will almost always ask for the migration test data.
Q3: Do pressure sensitive liners and induction foil liners both need migration testing?
Yes. Both liners touch the supplement powder. The adhesive layer on PS liners and the polymer sealing layer on induction foil liners are both contact materials and need separate migration coverage.
Q4: How long does migration testing take?
Standard lab turnaround is 2–4 weeks. If you are scheduling a new shipment to Australia, arrange testing at sample stage, not after mass production. This avoids costly rework.
Q5: Will every shipment be inspected for migration documents?
Australia uses risk-based inspection. Not every container gets checked, but if your brand or packaging type is flagged, you must have the documents ready. Many Australian supplement retailers also audit these files before listing your product.
Get Your Wholesale Packaging Bottle Inquiry Solution
Tell us your requirement for capacity, color, logo printing. We will reply you within 24 working hours.

